Canon Robotic Camera System CR-S700R
Specifications
Key Specifications
Centre-based system
Approx. 26 cm rotating radius (excluding the camera/lens)
Support for multiple cameras/heads
Efficient single user operation with the Camera Remote Application
Single ethernet cable
Provides signals for camera control, head operation and image data transfer
Specifications in detail
Robotic Camera System CR-S700R (Head)
Type
Centre-rotating system
Rotation
Pan (0°: front):
Angular range: -170 to 170°
Speed range: 0.5-120°/sec.
Tilt (0°: level):
Angular range: -40 to 220°
Speed range: 0.3-120°/sec.
Roll (0°: level):
Angular range: -100 to 100°
Speed range: 1-90°/sec.
Max. turning radius
Approx. 26 cm (excluding attached lens and camera)
Lens zoom control
Yes, external zoom unit
Interfaces
Power supply:
XLR 3-pin socket
Ethernet terminal:
RJ-45 terminal: 1000BASE-T compatible
Switch
On/Off switch
Mounting
Attaches with four M8 bolts
Max Power consumption
Approx. 160 W
Operating Environment
Temperature: -15 to 40°C
Humidity: not exceeding 90% RH (noncondensing)
Dimensions (W x D x H)
Approx. 411 x 523 x 382 mm (1.3 x 1.7 x 1.3 ft.)
(excluding camera, lens, and accessories)
Body weight
Approx.19 kg (41.8 lb.)
(including CR-G100, excluding camera and accessories)
Compatibility
Camera:
As of July 2024: EOS-1D X Mark II / Mark III, EOS R1 / R3 (requires CR-BP200), EOS R5 Mark II (requires CR-BP400)
Lens :
As of July 2024: EF 11-24mm f/4L USM*, EF 16-35mm f/2.8L III USM, EF 24-70mm f/2.8L II USM, EF 70-200mm f/2.8L IS III USM, EF 24-105mm f/4L IS II USM, EF 100-400mm f/4.5-5.6L IS II USM, RF 15-35mm F2.8L IS USM*, RF 24-70mm F2.8L IS USM*, RF 24-105mm F4L IS USM*, RF 24-105mm F2.8L IS USM Z (requires the lens mount adapter in CR-BP400), RF 70-200mm F2.8L IS USM (EOS R5 Mark II requires the lens mount adapter in CR-BP400), RF 100-500mm F4.5-7.1L IS USM (requires the lens mount adapter in CR-BP200), RF 24-240mm F4-6.3 IS USM, RF 100-300mm F2.8L IS USM (requires CR-BP300, but the rain cover and 2x RF Extender are not supported)
* Vignetting may occur at the wide-angle end and the rain cover is not supported.
(Note: The EOS R1 / R3 / R5 Mark II is required to use any of the RF mount lenses listed. EF lenses may also be used on these RF cameras, but will require the use of an EF-EOS R adapter)
Optional accessories
Base plates / adapters :
Base Plate CR-BP100 (Truss mounting plate for the CR-S700R)
Base Plate CR-BP200 (Enables the EOS R1 / R3 to be mounted onto the CR-S700R, and includes the lens mount adapter for the RF 100-500mmF4.5-7.1L IS USM lens)
Base Plate CR-BP300 (Enables the RF 100-300mm F2.8L IS USM lens to be mounted onto the CR-S700R and used with compatible RF mount cameras)
Base Plate CR-BP400 (Enables the EOS R5 Mark II (with the cooling fan grip installed) to be mounted onto the CR-S700R. It also includes the lens mount adapter for the RF 70-200mm F2.8L IS USM lens when used with the EOS R5 Mark II. Additionally, a lens mount adapter for the RF 24-105mm F2.8L IS USM Z lens for compatible RF mount cameras, is also included)
Rain cover :
Camera Remote Rain Cover URC-S1
Third party optional accessories
Power supply:
XLR 3-pin 24–28 V DC, approx. 160 W
(Recommended: 200 W or higher output, using a cable with a high current-carrying capacity of 8A or higher, and low resistance (less than 0.25 Ω))
Cameras:
(Wide-angle) Overview camera: Watec WAT-02U2D / WAT-06U2D
Eyepiece camera: Watec WAT-03U2
Other:
Zoom Gear: ARRI K2.66131.0 Zip Gear or other suitable gear rings
Joystick: APEM Desktop controller (100-590)
Joystick: PXN-2113 Game Flight Joystick
Controller: Sony DualShock 4 (CUH-ZCT2) Controller
Truss Clamps (for base plate)
IP Camera Controller CR-G100
Interfaces
Power/remote terminal:
HEAD Terminal - CR-S700R body connection
Digital terminal:
USB 3.0 (Type-C) CAMERA 1 terminal - EOS camera connection.
USB 3.0 (Type-A) EYEPIECE CAMERA terminal - Eyepiece camera connection.
USB 2.0 (Micro-B) VIEW CAMERA terminal - Overview camera connection.
Ethernet terminal:
RJ-45 terminal: 1000BASE-T, PoE (IEEE802.3 at Type1/Type2) - CR-S700R body connection.
RJ-45 CAMERA 2 terminal: 1000BASE-T - EOS camera connection.
Remote control terminal:
2.5 mm N3-type remote control - EOS camera connection
Switch
On/Off switch (with operation-lock function)
Power Consumption
Approx. 12 W (Maximum 25.5 W) - with PoE operation
Operating Environment
Temperature: -15 to 40°C
Humidity: not exceeding 90% RH (noncondensing)
Dimensions (W x H x D)
Approx. 142 x 38 x 114 mm (5.6 x 1.5 x 4.5 in.)
Body weight
Approx. 335 g (11.8 oz.)
Optional accessories
Application software:
Camera Remote Application CR-A100 - Controls multiple cameras/systems with one computer/application.
(Requires: Windows 10 64-bit (Intel Core i7 2.6GHz and 8GB RAM or greater), with Google Chrome)