Canon DP-V3120
Specifications
Canon DP-V3120
Specifications
4K
(4096 x 2160) resolution
UHD
(3840 x 2160) resolution
DCI
(2048 x 1080) resolution
Specifications in detail
Panel
Panel type
IPS LCD panel
Screen size
31.1 inch (79.0 cm)
Aspect Ratio
17:9
Resolution
4096×2160 (8.8 megapixels)
Active display area
Approx. 698.0×368.1 mm
Pixel Pitch
170 μm/149 ppi
Image Quality
Brightness
Standard
100 cd/m2
Peak, Full screen white
2,000 cd/m2
Viewing angle (Up, Down, Left, Right)
89° (contrast ratio 10 : 1 or higher)
Surface treatment
Anti glare coating
General
Backlight type
LED, Matrix Array
Power
Rated voltage: AC 100 - 240 V
Rated frequency: 50/60 Hz
Power Consumption
At maximum load (including change in brightness due to aging): Approx. 840W
At factory shipment: Approx. 175 W
Environmental Conditions
Usage
Temperature and humidity: 5 - 35 ℃ (20 - 85% RH no condensation)
Recommended temperature and humidity: 15 - 30 ℃ (20 - 80% RH no condensation)
Pressure: 700 - 1060 hPa
Storage/Transporting
Temperature and humidity: -20 - 40 ℃ (10 - 85% RH no condensation)
41 - 60 ℃(10 - 30% RH no condensation)
Pressure: 700 - 1060 hPa
Dimensions (width x height x depth)
Approx. 749×492×335 mm (including handle)
Approx. 749×470×295 mm (Display unit only, without protruding parts)
Weight
Approx. 31 kg
Mounting Hole Pitch
VESA standard 200×200 mm
Interface
Input
12G/6G/3G/HD/SD-SDI
4 (1 channel) BNC (75 Ω) Receptacle terminal
12G-SDI: SMPTE 2082 compliant
6G-SDI: SMPTE 2081 compliant
3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: SMPTE 259M compliant
HDMI
1 Type A
Copy protection: HDCP 2.2
Output
12G/6G/3G/HD-SDI
4 (Pass-through 1 channel)
Headphone
1 stereo mini-jack, supported impedance: 32 Ω - 64 Ω
Others
USB
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant
LAN
1 RJ-45 terminal
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant
REMOTE
1 RJ-45 terminal, GPI 8 pin